Finnish Army BTR-50 APC, Trumpeter 1:35

Been building this kit for a while now on and off. Not at all a great kit as it suffers from fit issues and a lot of flash on the parts, one of trumpeters older molds with some upgraded parts to make the BTR range.

If you plan to build it A MUST is to replace the tracks because the are so badly molded they cant even be used.. I replaced them with Friulmodel-tracks and used burnishing fluid to get the correct effect on them. Painted with AKAN finnish modern armor set, dark green and light green. The black is tamiya Nato black. The AKAN paint works great and are a great match for the modern hard edge camouflages that the finnish armored vehicles have.

Weathered with pigments and washes from MIG ammo. The antenna is made out of stretched sprue and towing cables from Eureka.

Jägermeister Porsche 934 Turbo RSR, Tamiya 1:24 Completed

A quick build of tamiyas Jägermeister Porsche 934 Turbo RSR in 1:24 scale.

Built out of the box and painted with Zero Paints Jägermeister Orange, 2K clear and metallic colors from AK and Alclad. Superb fit as always with tamiya but a bit simplified. The downside to the low part count is that a lot needs masking, like black trim and the engine that's molded to the floor.

The only thing that's been added and is not in the kit are seat-belts and fasteners, painted Good Year on the tire walls with a template. A stunning looking livery so will for sure build another Jägermeister livery racing car.

Messerschmitt Bf 109 G-6 (MT-451) Finnish airforce, Trumpeter 1:32 Completed

Been building this kit on and off for about a year, trumpeters 109 G-6 built as MT-451 finnish airforce. Flown by among others one of the great aces Ilmari Juutilanen.
Trumpeter kit has many faults but its an ok kit, great fit and will look good with some minor modifications. But I still think hasegawa is the best one with some resin upgrades. In my dreams I still see a Tamiya 1:32 109G-6 full detail kit.. that would be the day. To many allied 1:32 kits from them so time for the axis side.

Many parts taken from another 109 build Im working on, revells G-6. The trumpeter cockpit is awful more in 1:31 scale and the details are not even close to the real thing. Spinner has the wrong shape, was planning on using a resin one but it does not fit the fusalage so half of it is from revell and the other half from trumpeter. Painting done with gunze and masked with white tac and paper that I cut out from a 1:32 drawing copy.


Kit: Trumpeter Messerschmitt 109 G-6 1:32
Paints used: RLM colors from Gunze and Vallejo. Weathered with MIG AMMO panel liners, oils and pigments.
Aftermarket parts: Decals MDC. Wheels + oil cooler fairing + exhausts + supercharger intake from Barracudacast. Revi sight from quickboost. Seatbelts from HGW. 
Parts used from the new Revell 109G-6: Tail + Rudder, cockpit, top part of the spinner.

Messerschmitt me 262 A-1/U4 Hobby Boss 1:48 Completed

Always wanted to build the Messerschmitt Me 262 A-1/U4 with the big 50 mm cannon in the nose. The Hobby Boss kit is detailed but some moldings are a bit soft especially on the fuselage. The fit is generally good but some clamping action is needed where the wings meet the fuselage on the belly of the aircraft.

A must upgrade is the barrel and muzzle brake other then that the kit is good. The shape on the nose looks a bit of when looking at pictures, ok for me but not perfect.

kit: 1/48 Hobby Boss me 262 A-1/U4
colors: Vallejo Air RLM range
weathering: Done with Ammo and AK weathering products + pigments from Lifecolor.

Upgrade parts I used on this build:
-Resin wheels from Eduard
- Eduard Zoom Etch set for the cockpit
- Metal barrel and muzzle brake from Master
- Decals from Eagle Cal